This project walks through the creation of a Linux image in PetaLinux 2022.1 for the ZynqberryZero to mimic the RPi Zero functionality.

This project walks through how to program the QSPI flash of Trenz Electronic's Zynqberry boards (TE0726 & TE0727) in Vitis 2021.x and later.

This project walks through the hardware design for the ZynqberryZero in Vivado 2022.1 to be able to use Raspberry Pi accessories with it.

This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.

This project walks through how to get started with command line development for the Raspberry Pi Pico on an M2 Mac.

This project walks through how to deploy RTL designs in the programmable logic running independent of the Linux userspace on the KR260.

This project demonstrates how to implement a custom PL design on the KR260 utilizing its RPi & PMOD connectors.

Ubuntu Desktop can be broken by a driver update, knowing how to boot straight into the console and remove the problem driver is important.

This project walks through the creation of a custom Vitis platform and an accelerated application for the Kria KR260 Robotics Starter Kit.

This project walks through how to offload the generation of a sine wave into and FPGA's PL in an accelerated application in Vitis 2021.2

This project walks through how to set up a generic project in Vitis 2021.2 to debug FPGA accelerated applications using SW & HW emulation.

This project walks through how to build a custom hardware design for the Kria KR260 Robotics Starter Kit in PetaLinux 2022.1

This project walks through the details of adding the hooks for the hardware on the KR260 carrier board in a Vivado 2022.1 project.

This project walks through how to build a custom hardware design for the Kria KR260 Robotics Starter Kit in Vivado 2022.1

This project walks through the installation of Vitis and PetaLinux 2022.1 as well as KRS 1.0 on Ubuntu 22.04 Jammy Jellyfish.

This project walks through the basics of creating your own ML model in Edge Impulse & deploying it on the Kria KV260.

Using Vitis for FPGA acceleration, this post in the series for the KV260 covers the final step of creating & testing the Vitis Platform.

Applying the y2k22 patch for HLS in my system took a few extra steps outlined in this post.

This project outlines the latest updates to the Kria KV260 PetaLinux project when using the 2021.2 BSP since 2021.2 was originally released.

Using Vitis for FPGA acceleration, this second part covers how to add the accelerated kernel to the embedded Linux image in PetaLinux.