Home
Knitronics Blog
Project Tutorials
Install Guides
FPGA Basics
DSP for FPGA
The Zynqberry Patch
Kria KR260
Kria KV260
SP701
Eclypse Z7
Ultra96 V2
SDR
Major Projects
Summer of FPGA
Knitronics TV
About + Contact

Knitronics

Home
Knitronics Blog
Project Tutorials
Install Guides
FPGA Basics
DSP for FPGA
The Zynqberry Patch
Kria KR260
Kria KV260
SP701
Eclypse Z7
Ultra96 V2
SDR
Major Projects
Summer of FPGA
Knitronics TV
About + Contact
Screen+Shot+2020-11-10+at+10.46.19+PM.jpg
Whitney Knitter
May 27, 2023

Stream Zmod Digitizer Samples into Memory with AXI DMA

Whitney Knitter
May 27, 2023
Stream Zmod Digitizer Samples into Memory with AXI DMA

This project demonstrates how to stream samples from the ADC on the Zmod Digitizer into the DDR memory of the Eclypse Z7.

Source: https://www.hackster.io/whitney-knitter/stream-zmod-digitizer-samples-into-memory-with-axi-dma-185b8b

Whitney Knitter
May 27, 2023

Getting Started with Eclypse Z7 + AWG Zmod in Vivado 2022.1

Whitney Knitter
May 27, 2023
Getting Started with Eclypse Z7 + AWG Zmod in Vivado 2022.1

This project walks through how to create a base design on the Eclypse Z7 to use the AWG Zmod in custom projects.

Source: https://www.hackster.io/whitney-knitter/getting-started-with-eclypse-z7-awg-zmod-in-vivado-2022-1-416c7b

Whitney Knitter
May 27, 2023

Using eInk Displays with the ZynqberryZero

Whitney Knitter
May 27, 2023
Using eInk Displays with the ZynqberryZero

See how to control an eInk display with the UC8151D chipset from a ZynqberryZero running Adafruit's Circuit Python.

Source: https://www.hackster.io/whitney-knitter/using-eink-displays-with-the-zynqberryzero-00b476

Whitney Knitter
May 27, 2023

Adafruit CircuitPython on the ZynqberryZero

Whitney Knitter
May 27, 2023
Adafruit CircuitPython on the ZynqberryZero

How to modify Adafruit's CircuitPython packages to install them on the ZynqberryZero with a Linux image created in PetaLinux 2022.1

Source: https://www.hackster.io/whitney-knitter/adafruit-circuitpython-on-the-zynqberryzero-c1b201

Whitney Knitter
May 27, 2023

SPIdev Tutorial for Zynq-7000 FPGA Devices

Whitney Knitter
May 27, 2023
SPIdev Tutorial for Zynq-7000 FPGA Devices

This project walks through how to implement and use SPI in embedded Linux via the spidev kernel on the Zynq-7000 using PetaLinux 2022.1.

Source: https://www.hackster.io/whitney-knitter/spidev-tutorial-for-zynq-7000-fpga-devices-b5e399

Whitney Knitter
May 27, 2023

Eclypse Z7 + Digitizer Zmod Software Design in Vitis 2022.1

Whitney Knitter
May 27, 2023
Eclypse Z7 + Digitizer Zmod Software Design in Vitis 2022.1

This project continues with the bare metal application in Vitis for using the Digitizer Zmod on the Eclypse Z7 in a custom design.

Source: https://www.hackster.io/whitney-knitter/eclypse-z7-digitizer-zmod-software-design-in-vitis-2022-1-0a8657

Whitney Knitter
May 27, 2023

Eclypse Z7 + Digitizer Zmod Hardware Design in Vivado 2022.1

Whitney Knitter
May 27, 2023
Eclypse Z7 + Digitizer Zmod Hardware Design in Vivado 2022.1

This project walks through how to create a custom hardware design in Vivado 2022.1 for the Eclypse Z7 with the new Digitizer Zmod.

Source: https://www.hackster.io/whitney-knitter/eclypse-z7-digitizer-zmod-hardware-design-in-vivado-2022-1-1ff077

Whitney Knitter
February 12, 2023

TE0726 Zynqberry Software Design in Vitis 2022.1

Whitney Knitter
February 12, 2023
TE0726 Zynqberry Software Design in Vitis 2022.1

Using the base hardware design from Vivado 2022.1, this project walks through the software for the ARM Cortex processor of the Zynqberry.

Source: https://www.hackster.io/whitney-knitter/te0726-zynqberry-software-design-in-vitis-2022-1-aae170

Whitney Knitter
February 12, 2023

TE0726 Zynqberry Hardware Design in Vivado 2022.1

Whitney Knitter
February 12, 2023
TE0726 Zynqberry Hardware Design in Vivado 2022.1

This project walks through how to create a basic hardware design for the Zynqberry in Vivado 2022.1 to be compatible with Raspberry Pi pHATs.

Source: https://www.hackster.io/whitney-knitter/te0726-zynqberry-hardware-design-in-vivado-2022-1-39049f

Whitney Knitter
February 12, 2023

Getting Started with the XEM8320 in Vivado 2022.1

Whitney Knitter
February 12, 2023
Getting Started with the XEM8320 in Vivado 2022.1

This project walks through how to set up a base hardware design for the Artix UltraScale+ XEM8320 FPGA development board.

Source: https://www.hackster.io/whitney-knitter/getting-started-with-the-xem8320-in-vivado-2022-1-a067af

Whitney Knitter
February 12, 2023

Lego Land Rover Defender Robot with Kria KR260

Whitney Knitter
February 12, 2023
Lego Land Rover Defender Robot with Kria KR260

This project shows how I used the Kria KR260 & Edge Impulse to transform the Land Rover Defender Lego Technic kit into an autonomous robot.

Source: https://www.hackster.io/whitney-knitter/lego-land-rover-defender-robot-with-kria-kr260-f8974f

Whitney Knitter
February 12, 2023

Linux on Zynq: Arty-Z7 Linux Design in PetaLinux 2022.1

Whitney Knitter
February 12, 2023
Linux on Zynq: Arty-Z7 Linux Design in PetaLinux 2022.1

This project walks through how to create an embedded Linux image for the Arty-Z7 using PetaLinux 2022.1

Source: https://www.hackster.io/whitney-knitter/linux-on-zynq-arty-z7-linux-design-in-petalinux-2022-1-40c490

Whitney Knitter
February 12, 2023

Bare Metal/No-OS on Arty-Z7 in Vitis 2022.1

Whitney Knitter
February 12, 2023
Bare Metal/No-OS on Arty-Z7 in Vitis 2022.1

This project walks through no-OS development from hardware through to C code on the Zynq-based Arty-Z7 FPGA development board.

Source: https://www.hackster.io/whitney-knitter/bare-metal-no-os-on-arty-z7-in-vitis-2022-1-e07a99

Whitney Knitter
February 12, 2023

Getting Started with Avnet's ZUBoard-1CG

Whitney Knitter
February 12, 2023
Getting Started with Avnet's ZUBoard-1CG

This project walks through how to get up and running on the ZU Board using Avnet's build scripts for Vivado & PetaLinux 2022.1

Source: https://www.hackster.io/whitney-knitter/getting-started-with-avnet-s-zuboard-1cg-f1d793

Whitney Knitter
February 12, 2023

Linux on MicroBlaze: ArtyA7 Linux Design in PetaLinux 2022.1

Whitney Knitter
February 12, 2023
Linux on MicroBlaze: ArtyA7 Linux Design in PetaLinux 2022.1

This project details how to develop an embedded Linux image for a MicroBlaze design on the Arty A7 in PetaLinux.

Source: https://www.hackster.io/whitney-knitter/linux-on-microblaze-artya7-linux-design-in-petalinux-2022-1-eaa559

Whitney Knitter
February 12, 2023

Linux on MicroBlaze: ArtyA7 Hardware Design in Vivado 2022.1

Whitney Knitter
February 12, 2023
Linux on MicroBlaze: ArtyA7 Hardware Design in Vivado 2022.1

This project walks details the hardware design in Vivado required to run an embedded Linux image on the Arty A7.

Source: https://www.hackster.io/whitney-knitter/linux-on-microblaze-artya7-hardware-design-in-vivado-2022-1-2d07b5

Whitney Knitter
February 12, 2023

Bare Metal App Development for Arty A7 in Vitis 2022.1

Whitney Knitter
February 12, 2023
Bare Metal App Development for Arty A7 in Vitis 2022.1

This project walks through how to develop a bare metal application for AMD-Xilinx's MicroBlaze soft processor using Vitis 2022.1

Source: https://www.hackster.io/whitney-knitter/bare-metal-app-development-for-arty-a7-in-vitis-2022-1-f8a4a9

Whitney Knitter
February 12, 2023

Basic Hardware Design for Arty A7 in Vivado 2022.1

Whitney Knitter
February 12, 2023
Basic Hardware Design for Arty A7 in Vivado 2022.1

This project walks through how to create a basic hardware design for bare metal applications using Vivado 2022.1

Source: https://www.hackster.io/whitney-knitter/basic-hardware-design-for-arty-a7-in-vivado-2022-1-06fad4

Whitney Knitter
February 12, 2023

SDR on FPGA Part 1: ZCU102+AD9371 Setup

Whitney Knitter
February 12, 2023
SDR on FPGA Part 1: ZCU102+AD9371 Setup

Setup of the ZCU102 with AD9371 FMC card for SDR applications.

Source: https://www.hackster.io/whitney-knitter/sdr-on-fpga-part-1-zcu102-ad9371-setup-53c190

Whitney Knitter
February 12, 2023

Edge Impulse on Kria KR260

Whitney Knitter
February 12, 2023
Edge Impulse on Kria KR260

This project walks through how to install Edge Impulse on the Ubuntu 22.04 image of the Kria KR260 and the development of a basic ML model.

Source: https://www.hackster.io/whitney-knitter/edge-impulse-on-kria-kr260-ed12bc

Older Posts
Back to Top